Hardware Platforms

Cost-effective Bluetooth 5.4 SoC with 512KB Flash and 64KB RAM, ideal for wearables, beacons, and low-power sensor applications.

Advanced multiprotocol SoC with 1MB Flash, 256KB RAM, and USB support. The go-to chip for Bluetooth 5.4, Thread, Zigbee, and 802.15.4 applications.

Dual-core Bluetooth 5.4 SoC with dedicated application and network processors. 1MB Flash + 512KB RAM on the application core, with hardware security via ARM TrustZone.

Next-generation ultra-low-power Bluetooth 5.4 SoC with RISC-V and ARM Cortex-M33 cores. Designed for ultra-constrained battery-powered devices.

Cellular IoT SiP with integrated LTE-M/NB-IoT modem and GPS. Perfect for asset tracking, remote monitoring, and any application requiring wide-area connectivity.

Next-gen cellular IoT SiP with DECT NR+ support, LTE-M/NB-IoT modem, and GNSS. Enhanced successor to the nRF9160 with improved power efficiency.

Wi-Fi 6 companion IC designed to work alongside Nordic BLE SoCs. Adds dual-band Wi-Fi connectivity to existing nRF52/nRF53 designs.

Ultra-compact, cost-optimized BLE 5.4 SoC with 192KB Flash and 24KB RAM. The smallest, most affordable chip in the nRF52 series for simple BLE applications.

Cost-optimized BLE 5.4 SoC with 192KB Flash and 24KB RAM, featuring hardware SWI and NFC-A tag. Ideal for high-volume BLE peripherals and beacons.

BLE 5.4 SoC with optional 802.15.4 and ANT support plus long-range mode (Coded PHY). Extends nRF52810 with Thread and extended-range BLE capability.

BLE 5.4 and 802.15.4 SoC with USB 2.0 Full Speed and 256KB Flash. Bridges BLE/Thread wireless with USB at lower cost than the nRF52840.

Full-featured BLE 5.4 + 802.15.4 SoC with 512KB Flash, 128KB RAM, USB, and NFC. Offers extended-range BLE (Coded PHY) and mid-range capability between nRF52832 and nRF52840.

High-performance multicore SoC with dual Cortex-M33 (application + radio) plus a RISC-V VPR core. 2MB Flash and 1MB RAM, designed for complex multiprotocol BLE + 802.15.4 applications.

Entry-level nRF54L series SoC with ARM Cortex-M33 and RISC-V co-processor. Ultra-low-power BLE 5.4 with 512KB Flash — the most affordable chip in the nRF54L family.

Mid-range nRF54L series SoC combining ARM Cortex-M33 with a RISC-V co-processor. 1MB Flash and 128KB RAM with BLE 5.4, targeting wearables and connected sensors.

The flagship nRF54L series SoC built on a 22nm process, featuring a 128 MHz ARM Cortex-M33 + RISC-V co-processor with 2MB Flash and 512KB RAM — the largest memory in the nRF54L family. Supports Bluetooth LE, Matter, Thread, Zigbee, and 2.4 GHz proprietary protocols up to 4 Mbps. The nRF54LM20A variant adds 66 GPIOs and high-speed USB; the nRF54LM20B adds an integrated Axon NPU for hardware-accelerated Edge AI inference. Security includes TrustZone, CRACEN cryptographic engine with side-channel protection, and tamper detection.

Ultra-low-power single-band Wi-Fi 6 companion IC. Designed for the most cost-sensitive connected IoT products needing basic Wi-Fi alongside a Nordic BLE host SoC.

Single-band Wi-Fi 6 companion IC with WPA3 support. Adds 2.4 GHz Wi-Fi to existing nRF52/nRF53 designs with a smaller footprint than the dual-band nRF7002.

Ultra-compact LTE-M/NB-IoT SiP (System-in-Package) with DECT NR+ support and GNSS. The smallest form-factor nRF91 series chip for space-constrained cellular IoT designs.

LTE-M/NB-IoT SiP with integrated GNSS, DECT NR+, and extended temperature support. An improved nRF9160 successor with lower power consumption and industrial-grade temperature range.

DECT NR+ and LTE-M/NB-IoT SiP designed for the unlicensed 1.9 GHz DECT band. Enables high-speed, low-latency local-area wireless for industrial automation and smart factory applications.